2-in-1 Robotics Kit | Line Following & Edge Avoiding Robot DIY Kit | 4WD Smart Car STEM Learning Kit with Online Guide
A smart DIY Line Following Robotic Car that automatically follows a black line using IR sensors — no coding required! Perfect for students to learn basic robotics, sensors, and automation in a fun, plug-and-play way.
Original price was: ₹2,999.00.₹2,000.00Current price is: ₹2,000.00.
The Line Following Robotic Car is a smart DIY robot that automatically follows a black line path using IR sensors — without any coding! Designed by MR Tech Box, this kit helps students easily understand how real robots sense and move using simple electronic logic.
By making this project, students not only build their own working robot but also learn the basics of sensors, automation, and motor control — all in a fun, plug-and-play way. It’s perfect for school exhibitions, Inspire Award projects, and beginners who want to start robotics without programming.
Related Products
ABSTRACT In This Project We show Load Sharing Idea , In Project When Any Power Plant Generates a Electricity then that electricity go to substation and then that substation transfer to electricity to city , If power plant suddenly generate electricity high , substation automatic share electricity to second other substation so in this project we can see load sharing when supply up and when upper supply low automatic load sharing stop and when power plant again and again generating voltage do up , so when substation have maximum limit point if that point cross then automatic both substation of and power cut , so by this idea all fault and electricity loss we can cover if voltage coming high .
INTRODUTION
This Project Aim is Over Load Sharing with Overload Protection , In This Project We use One Transformer and Voltage Controller that Transformer can do voltage up and down by Rotating Voltage controller cap , this system in this project showing as a power plant system by this system we give to power supply in our project substation , When we start given power supply to our project first power supply go to first substation if power supply perfect means substation one have set maximum voltage so if power supply come and voltage low then substation one full working and give power to city and if power plant supply we again and again up then substation one maximum voltage limit cross then he turn on the sharing power supply to our second substation and when we again up the voltage and voltage cross maximum limit to second transmission then automatic power plant power supply relay off so full substation power supply off , So by this process we can save many fault loss . So This Is Our Best Electrical Engineering Project For Advanced Techniques for Transmission Line Overload Protection and Overload Sharing .
The Arduino-Based Obstacle Avoiding Robot Car is an innovative project designed to demonstrate how automation and sensors can be used for smart navigation. This car is capable of moving automatically without colliding with any obstacles. It is built using an Arduino Uno, Ultrasonic Sensor, L298 Motor Driver Module, 4 BO Motors with Wheels, and a 12V Battery. The body of the car is handmade from hard cardboard, showcasing creativity and engineering skills.
Solar tracker, a system that positions an object at an angle relative to the Sun. The most-common applications for solar trackers are positioning photovoltaic (PV) panels (solar panels) so that they remain perpendicular to the Sun’s rays and positioning space telescopes so that they can determine the Sun’s direction. PV solar trackers adjust the direction that a solar panel is facing according to the position of the Sun in the sky. By keeping the panel perpendicular to the Sun, more sunlight strikes the solar panel, less light is reflected, and more energy is absorbed. That energy can be converted into power and we store that power to battery in this project and when sunlight not available night start that time automatic that store power go to street light and street light On and street light glowing in night time by store solar tracker power .
The Human Following Robotic Car is an intelligent plug-and-play robot that automatically follows human movement using smart sensors — no coding required! It’s a fun and educational robotics project for students to explore automation, obstacle detection, and motion control easily and interactively.
The Hot Air to Water Generation System is an innovative DIY project kit designed for students to learn how water can be generated from hot air using solar energy and natural cooling.
This project demonstrates a real-world solution for water scarcity and promotes sustainable agriculture.
The Smart Dustbin is an Arduino-based automatic waste bin that opens its lid automatically when someone comes near it using an ultrasonic sensor and servo motor. A green LED light glows with the message “USE ME” to guide users. This touchless system promotes hygiene, reduces manual contact, and encourages cleanliness in homes and public areas.
I Will Provide You All Components , Parts , Machines , Tools , Decoration Materials Available In Kit Box .
I Will Provide You All Components , Parts , Machines , Tools , Decoration Materials Available In Kit Box . Than I will provide You full Step By Step Making Video + Report File + Synopsis File + Making Video My Team Help You
We Will Give You In Kit Box All Materials/Parts/Machines/Tools With (10 Extra Surprise) Decoration Materials . That Not Showing Here Buy Kit Box & Get That Surprise Materials
This project is based on an Object Detection Radar System which uses an Ultrasonic Sensor mounted on a Servo Motor controlled by an Arduino Uno. The servo motor continuously rotates from 0° to 180° to scan the surroundings, similar to a radar system. When any object comes within the sensing range (40 cm), the ultrasonic sensor detects it, and the servo motor immediately stops at that specific angle. The system then displays the detected object’s distance and angle on the I2C Display.
In This Project Kit Box We Will Give You All Made Circuit And Extra Decoration Materials , And Step By Step Videos ,3D Circuit Diagram , And Reading Pages , Synopsis File , And Online Training Access
This Arduino RFID Access Control System uses an RC522 module to read card UIDs, an I2C LCD to display messages, and a servo motor to open or close the door automatically. A blue LED indicates card detection. It’s a simple, low-cost security project ideal for beginners in IoT and electronics.
Renewable Energy Storage Solution: Gravity battery is a sustainable energy storage solution for, designed to store excess energy generated from renewable sources like solar or wind.
Low Environmental Impact: Environmentally friendly as it avoids hazardous materials and relies on gravitational potential energy, reducing the ecological footprint. Scalable and Modular Design:
Gravity batteries have longer lifecycles compared to conventional batteries, leading to reduced replacement and maintenance costs.
Reviews
There are no reviews yet.