Transmission Line Overload Protection and Overload Sharing/Electrical Engineering Project
ABSTRACT In This Project We show Load Sharing Idea , In Project When Any Power Plant Generates a Electricity then that electricity go to substation and then that substation transfer to electricity to city , If power plant suddenly generate electricity high , substation automatic share electricity to second other substation so in this project we can see load sharing when supply up and when upper supply low automatic load sharing stop and when power plant again and again generating voltage do up , so when substation have maximum limit point if that point cross then automatic both substation of and power cut , so by this idea all fault and electricity loss we can cover if voltage coming high .
INTRODUTION
This Project Aim is Over Load Sharing with Overload Protection , In This Project We use One Transformer and Voltage Controller that Transformer can do voltage up and down by Rotating Voltage controller cap , this system in this project showing as a power plant system by this system we give to power supply in our project substation , When we start given power supply to our project first power supply go to first substation if power supply perfect means substation one have set maximum voltage so if power supply come and voltage low then substation one full working and give power to city and if power plant supply we again and again up then substation one maximum voltage limit cross then he turn on the sharing power supply to our second substation and when we again up the voltage and voltage cross maximum limit to second transmission then automatic power plant power supply relay off so full substation power supply off , So by this process we can save many fault loss . So This Is Our Best Electrical Engineering Project For Advanced Techniques for Transmission Line Overload Protection and Overload Sharing .
Original price was: ₹4,999.00.₹4,500.00Current price is: ₹4,500.00.
This Project Aim is Over Load Sharing with Overload Protection , In This Project We use One Transformer and Voltage Controller that Transformer can do voltage up and down by Rotating Voltage controller cap , this system in this project showing as a power plant system by this system we give to power supply in our project substation , When we start given power supply to our project first power supply go to first substation if power supply perfect means substation one have set maximum voltage so if power supply come and voltage low then substation one full working and give power to city and if power plant supply we again and again up then substation one maximum voltage limit cross then he turn on the sharing power supply to our second substation and when we again up the voltage and voltage cross maximum limit to second transmission then automatic power plant power supply relay off so full substation power supply off , So by this process we can save many fault loss . this is our project idea.
Related Products
Design and Operation: VAWTs typically consist of two or more blades that rotate around a vertical axis. The blades can have different shapes, such as straight, helical, or S-shaped, and are attached to a central shaft. As the wind blows, the blades capture the kinetic energy and convert it into mechanical rotation, which can then be used to generate electricity through a generator or to perform other tasks directly.
The name of this project is safety helmet. Mainly work of this project is safety of a rider. We make a connection between bike and helmet by using the sensors. When rider will wear the helmet then our bike start. If the rider will not wear the helmet then bike will not start. We use the indication system in the helmet also. Indication system will show you wear the helmet properly or not. So it’s good for safety purpose and we safe it from thief also. Because without helmet bike will not start.
If You want to make more than one project then buy this project kit and Make Any 52 Type of Project by this project kit – For Example – Anti-gravity Structure/Gravity Battery/Tesla Coil/Smart Street Light/Automatic Night Lamp/Windmill Working Model/Solar Tracker/Automatic Hand Wash Machine//Smart Irrigation Project +More
Objective: To mitigate air pollution by capturing vehicle emissions and converting them into usable ink.
Technology Used: Carbon filters integrated into vehicles to capture emitted smoke particles.
Conversion Process: Smoke particles trapped by filters are processed to extract carbon-based materials suitable for ink production.
Generate Electricity By Waste Materials
Inspire Award Project Kit Box
Generate Electricity By Plastic
Electrical Engineering Project Kit Box
Free Energy Project Kit Box
In This Project Our Purpose is for showing how we can protect our forest , In This Project we show a device that device can listen gun sound and activate the sound alarm , this device is amazing , when we use in our forest this device then if any one come for huntering , when we use gun for killing animals then that device capcher the gun sound and transfer the signal to near forest department and there are available receiver so alarm start in forest department so there everyone understand someone enter to forest for huntering animal and he run for stop huntering , this is best device for stop huntering
How It Works: Traffic Light Sequence: Our setup uses BC547 transistors to control the traditional red, yellow, and green traffic lights, allowing them to operate in a seamless sequence.
Blue LED Congestion Indicator: The key feature of our system is the blue LED, which lights up to indicate traffic congestion.
IR Sensor Modules: We have installed three IR sensor modules along the road. These sensors detect the presence of vehicles.
Relay Modules: Each IR sensor is connected to a relay module. When all three sensors detect vehicles simultaneously, they activate their respective relays.
Congestion Detection: Once all the relay modules are active, the blue LED lights up, indicating that the road is congested. If any one of the relay modules is inactive, it means there is space on the road, and the blue LED remains off, indicating that traffic is flowing smoothly.
Benefits: This project provides real-time traffic updates, helping drivers make informed decisions and allowing authorities to manage traffic more efficiently.
IR Sensor: The IR sensor is used to detect the presence of a vehicle. When a vehicle enters the range of the sensor, it detects its presence. Relay Module: The relay module is used to control the system. Once the IR sensor detects a vehicle, it sends a signal to the relay module, which in turn activates the LED bulb and alarm. LED Bulb: The LED bulb is used to indicate the presence of a vehicle coming from the opposite side. When a vehicle is detected by the IR sensor, the LED bulb on the other side turns on, alerting drivers. Alarm: The alarm sounds to provide a warning of the vehicle’s approach, ensuring further attention and safety. Wiring and Connections:
Working Principle: When a vehicle enters the range of the IR sensor, the sensor detects its presence. The IR sensor sends a signal to the relay module. The relay module then activates the LED bulb and alarm on the opposite side. The alarm and LED bulb warn the drivers that a vehicle is approaching.
Objectives: Enhance road safety by alerting drivers about vehicles approaching from the opposite side. Prevent traffic accidents, especially in areas with limited visibility. Create a simple and cost-effective vehicle detection system for traffic monitoring.
Expected Outcomes: Early warning system for approaching vehicles, giving drivers more time to react. Improved awareness and timely responses from drivers to avoid accidents. Efficient use of sensors and alarms to ensure smooth traffic flow and safety.
Applications: Safety alert system on narrow roads or blind spots. Traffic control at signal points or crossing areas. Monitoring vehicles in industrial areas or warehouses where safety is critical.
Future Improvements: Use of advanced sensors (e.g., ultrasonic) for better accuracy. Integration with traffic signal systems for automated control. Solar-powered systems for cost-effective outdoor applications.
This DIY project features a wearable watch with an RC transmitter that sends emergency signals to the nearest police car, triggering an alarm and red light for immediate response. Perfect for school projects, engineering experiments, DIY enthusiasts, and Inspire Awards. Watch now to see how this low-cost, localized system ensures quick action in emergencies and enhances women’s safety.
Welcome to our Smart Inverter Project tutorial! In this video, we’ll show you how to build a DIY inverter that provides an automatic power backup solution for your home. If you’re looking for a continuous power supply during outages, this inverter with battery storage will keep your lights on even when the main power goes out.
This project involves creating a smart inverter circuit that can seamlessly switch from AC power to a 12V DC battery when the electricity supply is interrupted. Not only does it ensure uninterrupted power to your 230V AC appliances, but it also recharges the battery when the main power is available.
In this detailed how-to guide, we cover everything from the basic components needed to the step-by-step assembly and testing of the inverter. Plus, we’ll discuss how this inverter system can be adapted for use in transmission lines, ensuring a reliable power supply to cities from substations, even if the main transmission line fails temporarily.
What You’ll Learn in This Video:
Inverter Basics: Understand how an inverter works and the role of battery storage in providing continuous power.
Step-by-Step Construction: Follow our easy instructions to build your own inverter circuit with a 12V DC battery backup.
Automatic Switching: Learn how the inverter automatically switches to battery power during outages and back to AC power when available.
Practical Applications: Discover how this smart inverter system can be used in transmission lines to maintain city power supply during disruptions.
Reviews
There are no reviews yet.